OpenHarmony鸿蒙硬件-vmware创建虚拟机-马育民老师

# 新建虚拟机

[![](https://www.malaoshi.top/upload/pic/vmware/Snipaste_2022-03-12_14-33-52.png)](https://www.malaoshi.top/upload/pic/vmware/Snipaste_2022-03-12_14-33-52.png)

[![](https://www.malaoshi.top/upload/0/0/1GW324oZSb0H.jpg)](https://www.malaoshi.top/upload/0/0/1GW324oZSb0H.jpg)

# 选择系统的ios文件

[![](https://www.malaoshi.top/upload/0/0/1GW324ox0UxM.jpg)](https://www.malaoshi.top/upload/0/0/1GW324ox0UxM.jpg)

# 设置系统名称、用户名、密码

对于有的系统，这里设置后，还需要再次设置

[![](https://www.malaoshi.top/upload/0/0/1GW324pBMZNQ.jpg)](https://www.malaoshi.top/upload/0/0/1GW324pBMZNQ.jpg)

# 设置保存位置

一般系统占用空间会很大，不要放到C盘

[![](https://www.malaoshi.top/upload/0/0/1GW325303Nrj.jpg)](https://www.malaoshi.top/upload/0/0/1GW325303Nrj.jpg)

# 设置磁盘空间

[![](https://www.malaoshi.top/upload/0/0/1GW324qUSazZ.jpg)](https://www.malaoshi.top/upload/0/0/1GW324qUSazZ.jpg)

# 最后一步

[![](https://www.malaoshi.top/upload/0/0/1GW324qmMDOe.jpg)](https://www.malaoshi.top/upload/0/0/1GW324qmMDOe.jpg)

# 启动

[![](https://www.malaoshi.top/upload/0/0/1GW324zhvNEM.jpg)](https://www.malaoshi.top/upload/0/0/1GW324zhvNEM.jpg)

原文出处：http://www.malaoshi.top/show_1GW3254QGgnr.html